My Account
Blasting
Showing 31–45 of 373 results
-
The biggest revolution in Water Jetting! New precision engineered material grade tetraCORE diamond for optimised productivity and reduce operating cost for water jetting projects. Experience 10-15 times longer life than sapphire nozzles! tetraCORE diamond nozzles ensure:- Up to 60,000 psi operating pressure
- Zero ID edge degradation over use
- Premium jet stream coherency & integrity
- Optimised jet stream length and consistency
- Maximised uptime and productivity
- 100% testing of all nozzles prior to shipping
-
Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:- 3/8" NPT Thread in either Male or Female configuration
- Male version has brass threads and requires a minimum opening clearance of 1". This version is 1-7/8" long.
- Female version has steel threads and requires a minimum opening clearance of only ¾". This version is 3-1/8" long.
- These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
- Angle options include:
- 45° & 60° forward blast
- 90° right angle blast
- 135° reverse blast
- Some options available in double, triple or quad orifices in addition to single.
- Note: Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
- Stock version uses tungsten carbide lining.
-
Short nozzles with straight bore are made for close-range spot blasting. The blast pattern is small, making it ideal for cleaning small areas, railings, etc. Other details as follows:- Fine thread, 1-¼" - 11-½" NPSM
- Available in sizes from #3 to #8
- Tungsten carbide liner
-
Short venturi nozzles are made for close-range blasting. The venturi allows the widest possible pattern in limited space environments. Other details as follows:- Available in either Contractor thread (50mm) or Fine thread (1-¼")
- Available in orifice sizes from #3 to #12
- Tungsten carbide liner
- Multiple jacket types available
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”. Other information is as follows:- Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
- aka “Nut and Tail”
- The first dimension is the hose ID for the hose barb
- Use with crimp ferrules or worm gear clamps
- Applications: Low-Pressure SAE general service air, water, and hydraulic hose
- Operating Pressure Range: 250 PSI maximum at 72F
- Operating Temperature Range: -40 to 160F at 150 PSI max
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Male Pipe NPTF brass fittings. Other information is as follows:- Hose Barb x Male Pipe NPTF (first dimension is the hose ID for the hose barb)
- Use with crimp ferrules or worm-gear clamps
- Applications: Low Pressure SAE general service air, water, and hydraulic hoses
- Operating Pressure Range: 250 PSI Maximum at 72F
- Operating Temperature Range: -4C to 71F at 150 PSI Max.
-
BlastOne offers a full selection of industrial fittings. This group is the Brass Reducer Bushings. Other information is as follows:- 1st dimension is the NPTF Male Pipe size
- 2nd dimension is the NPTF Female Pipe size
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -54 to 121C
-
BlastOne offers a full selection of industrial fittings. This group is the Hex Nipples. Other information is as follows:- NPTF Male Threads
- Both standard and reducer versions available
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -54 to 121C
-
The Brass Nut and Tails Female Pipe Coupling (FP x FP) is a high-quality machined brass fitting designed for hydraulic and pneumatic systems. Manufactured to meet SAE J530 and J531 standards, this pipe coupling can handle pressures up to 1,000 PSI and temperatures ranging from -54°C to +121°C. It’s ideal for industrial applications requiring durable, leak-proof connections. Main Product Features:- Solid machined brass construction for enhanced durability
- Female pipe coupling (FP x FP) design
- Performs to SAE J530 and J531 standards Working pressure: 1,000 PSI; Burst pressure: 4,000 PSI
- Temperature range: -54°C to +121°C
- Compatible with hydraulic and pneumatic systems
- Ideal for high-pressure applications in fluid transfer
-
Discover a complete selection of breathing tubes and tube covers for GVS / RPB respirators at BlastOne/ These support both Supplied Air Respirators (SAR) and Powered Air-Purifying Respirators (PAPR) to ensure compatibility with your specific model.
Features and Benefits:
- Compatibility as follows:
- Nova 2000 SAR Breathing Air Tube, legacy version with adapter, MPN: NV2021A
- Nova 3 & updatd Nova 2000 SAR Breathing Tube, MPN: NV32021B (does not include adapter)
- T-Link, T200, Z4, & Z-Link SAR Breathing Air Hose, MPN: 04-833A (includes adapter for Z-Link & T-Link)
- Protective tube covers for extended durability and performance
- PAPR breathing tube solutions for GVS / RPB systems
- Reliable parts for maintaining optimal respirator functionality
- Compatibility as follows:
-
HLNV2013The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.- Designed exclusively for the RPB Nova 2000 Blast Helmet
- Prevents dust and grit penetration for enhanced protection
- Keeps press studs free of grit for easy cape reattachment
- Sold individually for convenience
- Genuine RPB Safety manufactured part ensures quality and compatibility
HLNV2013The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.- Designed exclusively for the RPB Nova 2000 Blast Helmet
- Prevents dust and grit penetration for enhanced protection
- Keeps press studs free of grit for easy cape reattachment
- Sold individually for convenience
- Genuine RPB Safety manufactured part ensures quality and compatibility
-
HLNV3759- Suits RPB Nova3 Blast Helmet
- Cape Cover Band is installed over the top of the blast cape
- Used to keep dust and abrasive out of the inside of the blast hood and cape
- Sold Individually
- Genuine Parts - Manufactured by RPB Safety
HLNV3759- Suits RPB Nova3 Blast Helmet
- Cape Cover Band is installed over the top of the blast cape
- Used to keep dust and abrasive out of the inside of the blast hood and cape
- Sold Individually
- Genuine Parts - Manufactured by RPB Safety
-
FMSL38HCB22.- Claw Clamp
- 38mm (1 1/2'') Claw Clamp
FMSL38HCB22.- Claw Clamp
- 38mm (1 1/2'') Claw Clamp
Part Number Purchase Price FMSL38HCB22. $100.80 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$100.80
-
-
DM2013402- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
DM2013402- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
-
- Multi-purpose inline ball valve
- Plated brass corrosion-resistant body
- Full bore design for maximum airflow
- Rated for use up to 600 psi
- Female NPT threaded ports
- Sold individually