Painting
Showing 46–60 of 126 results
-
GR287032
- 60# mesh coating spray gun filter for in handle filter units
- #60 Mesh Gun Filter
- Series II Guns
GR287032- 60# mesh coating spray gun filter for in handle filter units
- #60 Mesh Gun Filter
- Series II Guns
-
GR116402
- Graco Adapt Nipple for Xtreme Quick Knockoff
- Connects onto the bottom of the lower for the pick up tube with Quick Knock off fitting to attach to
GR116402- Graco Adapt Nipple for Xtreme Quick Knockoff
- Connects onto the bottom of the lower for the pick up tube with Quick Knock off fitting to attach to
-
GM25P245Graco Z60 Package E-Xtreme Electric High Performance Airless Pump Includes Heavy Duty Cart, 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose, XTR704 Spray gun, XHD519 spray tip The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers. It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.GM25P245Graco Z60 Package E-Xtreme Electric High Performance Airless Pump Includes Heavy Duty Cart, 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose, XTR704 Spray gun, XHD519 spray tip The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers. It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.
-
Features:
- Two x 2” ports, unfitted
- Four x 1” ports, unfitted
- One x ¼” drain port, valve fitted
- Female BSP threaded ports
Certified to AS1210 – 150 psi
-
General purpose air pressure gages for monitoring of air pressure
-
General purpose air pressure regulators
Ideal for regulating air pressure on airlines and pressurised equipment. -
SBMF1000B
- Fully compliant with all Australian regulations
- Exhausts at a rate of 0.5M/second
- 2 Standard widths - 1 metre and 2 metre
- Uses Andreae filters to capture overspray
SBMF1000B- Fully compliant with all Australian regulations
- Exhausts at a rate of 0.5M/second
- 2 Standard widths - 1 metre and 2 metre
- Uses Andreae filters to capture overspray
-
- Multi Purpose full face respirator for grinding, welding and painting
- Loved by Painting Contractors that have to do weld repairs to tanks before recoating
- Has a padding system that makes it move properly with your head
- Operates from either Supplied Air or via Back pack PAPR
- Approved as a Hard Hat (ANSI Z89.1)
- Multiple Capes available - Tychem QC (Good for Painting) Zytec FR (Good for Welding/Grinding)
- Has optional weld visor attachment
- Sold as a package - select your options
- Genuine Products - Manufactured by RPB Safety
-
Please note that C40 is not included.
The T200 Respirator is designed specially for the healthcare market and is also a good option for part-time industrial applications. It offers:
- Large viewing window for exceptional downward and peripheral vison
- Adjustable sizing to ensure a customisable secure fit for all head shapes and sizes
- Moveable lens and airduct positioning to accommodate for facial features, optical aids, and loupes
- Available with two head suspension systems:
- Bump Cap
- Head Harness
- Various replacement cape styles include:
- Tychem 2000 Face Seal (open ears - designed to use with stethoscopes)
- Tychem 2000 Face Seal/hood (covers ears)
- Tychem 2000 Full Hood (shoulder length)
- Tychem 4000 Full Hood, with sealed seams for maximum protection
- Peel-off lenses available
- No fit testing required
- Deconable head suspension system and disposable hood
- Compatible with PAPR
-
OPCSH10
- Comes in pack of 10 hoods
- Keeps the dust and overspray out of your hair
- Low cost, disposable design
- Elastic face opening
- Calico fabric
OPCSH10- Comes in pack of 10 hoods
- Keeps the dust and overspray out of your hair
- Low cost, disposable design
- Elastic face opening
- Calico fabric
-
OPCSS10
- Comes in pack of 10 hoods
- Comfortable elastic stretch fabric
- Conforms to head contours
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
OPCSS10- Comes in pack of 10 hoods
- Comfortable elastic stretch fabric
- Conforms to head contours
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
-
Experience the safety of the CEJN Double Dual Action Fitting for Breathing Air (SKU: P-FBQC) - designed to prevent accidental disconnections and compliant with Australian Standards.
- Approved to Australian Standards for Breathing Air
- Unique double action prevents accidental disconnection if coupling is snagged during use
- Available with hose tails, male and female threads
- Select the fitting the you require
-
GR189920
- Inlet Strainer
- Inlet Strainer with 1" thread Stainless Steel Suits Xtreme Pick up tube
GR189920- Inlet Strainer
- Inlet Strainer with 1" thread Stainless Steel Suits Xtreme Pick up tube
-
IPC80300
- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
-
GR245065
- Suits Warrior 4000 Conventional Sprayer
- Diaphragm Repair Kit
- Long Lasting, high quality parts
- 2 Diaphragms
- 4 nylon check ball seats
- Sold as a Kit
GR245065- Suits Warrior 4000 Conventional Sprayer
- Diaphragm Repair Kit
- Long Lasting, high quality parts
- 2 Diaphragms
- 4 nylon check ball seats
- Sold as a Kit














