My Account
Painting
Showing 16–30 of 126 results
-
- Suit Graco Endurance, Extreme and Maxlife Lower "Legs"
- Repair Kits include all seals and upper rod and lower balls needed to completely repair
- Extreme Seal has 3x UHMWPE and 2x Leather Seals – Ideal for abrasive applications
- TuffStack PTFE Seals are Carbon filled Teflon – Ideal for chemical resistance and higher temperatures
- Sold Individually
- Geniune Parts - Manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 10 to 12 inch fan width (XHD5 series).
- In this group, the orifice sizes range from .009 to .075 inches (sizes 509 to 575)
- Designed to be used with the Graco XHD Tip Guard
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 12 to 14 inch fan width (XHD6 series).
- In this group, the orifice sizes range from .009 to .075 inches (sizes 609 to 675)
- Designed to be used with the Graco XHD Tip Guard
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 14 to 16 inch fan width (XHD7 series).
- In this group, the orifice sizes range from .011 to .071 (sizes 711 to 771)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 16 to 18 inch fan width (XHD8 series).
- In this group, the orifice sizes range from .013 to .067 inches (sizes 813 to 867)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 18 to 20 inch fan width (XHD9 series).
- In this group, the orifice sizes range from .023 to .039 (sizes 923 to 939)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 2 to 4 inch fan width (XHD1 series). All other Graco XHD tip sizes are also available.
- In this group, the orifice sizes range from .007 to .039 inches (sizes 107 to 139)
- Ideal for use with industrial high solids and heavy duty coatings
- Heavy-duty carbide tip construction
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 4 to 6 inch fan width (XHD2 series).
- In this group, the orifice sizes range from .009 to .039 inches (sizes 209 to 239)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 6 to 8 inch fan width (XHD3 series).
- In this group, the orifice sizes range from .007 to .055 inches (sizes 307 to 355).
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
- Male threads at both ends
- Carbon steel construction
- Optional stainless steel also available
- Various seal material options for fluid compatibility
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- Premium PEEK Seals have more than double the life of Teflon
-
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
-
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
-
The RPB Nova 3 Blast Helmet Respirator (SKU: P-HLNV3) is the industry leader in operator comfort and safety, offering NIOSH-certified respiratory protection with a 1000 APF rating. Designed for blasting professionals, it features advanced padding, noise attenuation, and customizable cape and climate control options.
Key Features:
- Comfort padding for even weight distribution and enhanced head movement
- 20dB noise attenuation for quieter operation
- NIOSH-approved with a 1000 APF rating for ultimate respiratory protection
- Multiple cape options: nylon or leather in standard and extended lengths
- Climate control options: heating, cooling, and PAPR systems
-
The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators. Refresh or expand your PX5 using the filters and cartridges available below:- Pre-Filters. Extend the life of the main filters using these. 10 per pack.
- Spark Arrestor. Essential when using the PX5 in certain applications.
- HEPA Cartridge Filter. The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
- Organic Vapor and Acid Gas Cartridge Filter. (HE/OV/AG.) Label Color Code Yellow/Magenta. The painters favorite. Approved for the following gases:
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas / HE Cartridge Filter. Label Color Code Olive/Magenta. Approved for all the same gases as the OV/AG filter plus the following:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine