My Account
Blasting
Showing 91–105 of 373 results
-
- Suits RPB Nova 2000 Respirator
- Replacement Side Wings, which encase the blasters head and ears
- Smaller heads = thicker paddings
- Larger heads = thinner paddings
- Versions also available to suit wearers of glasses
- Sold as a pair - Left & Right
- Genuine Parts - Manufactured by RPB Safety
-
APF3004- Replacement filter drain valve for the RPB Radex Breathing Airline Filter (P-APF3)
- Made of brass
- Sold individually
APF3004- Replacement filter drain valve for the RPB Radex Breathing Airline Filter (P-APF3)
- Made of brass
- Sold individually
-
- For attaching couplers and nozzle holders to blast hoses
- Used in conjunction with a small amount of silicon to install couplings
- Domehead or Countersunk
- SEE Screw Selection CHART in Additional Information below for proper sizing
- Sold in packs of 200
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
HLNV3731- Kit includes L & R Side Padding Frames (NV3-731)
- Suits RPB Nova3 Blast Helmet
- Used to hold the side pads which encase the blasters ears
- Sold as a complete kit
HLNV3731- Kit includes L & R Side Padding Frames (NV3-731)
- Suits RPB Nova3 Blast Helmet
- Used to hold the side pads which encase the blasters ears
- Sold as a complete kit
-
GV2410322SP- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
GV2410322SP- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
Part Number Purchase Price GV2410322SP $103.63 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$103.63
-
-
GV2410323- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
GV2410323- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
-
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
Part Number Purchase Price RUBVD422007 $128,455.69 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$128,455.69
-
-
RUBVD422009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V700 and includes the following:- ESCON 70/10 Motor Controller CB4.0
- Actuator 90mm with Connector
- V700 WCS with Connector
- Limit Switch with Connector
- Harting Han-Eco Locking Lever
- Swingarm Clamp with Shaft, includes key
- Gearbox 050 with Flange
- V700 Motor Assembly
- Relay Module
- Castor Wheel
RUBVD422009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V700 and includes the following:- ESCON 70/10 Motor Controller CB4.0
- Actuator 90mm with Connector
- V700 WCS with Connector
- Limit Switch with Connector
- Harting Han-Eco Locking Lever
- Swingarm Clamp with Shaft, includes key
- Gearbox 050 with Flange
- V700 Motor Assembly
- Relay Module
- Castor Wheel
Part Number Purchase Price RUBVD422009 $474,868.09 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$474,868.09
-
-
Many time-saving Vac Hose Fittings are available. This group includes:- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
-
-
HATZ16810- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
HATZ16810- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
-
HAZ16810MT- Safety Lens (16-810-MT)
- Mirror Tint
- Anti-Fog / Anti-Scratch
HAZ16810MT- Safety Lens (16-810-MT)
- Mirror Tint
- Anti-Fog / Anti-Scratch
Part Number Purchase Price HAZ16810MT $167.35 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$167.35
-
-
HANVZ811- Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
- Tear-off are easily removable
- Keep vision field clean and clear without removing helmet
- Pack of 50
HANVZ811- Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
- Tear-off are easily removable
- Keep vision field clean and clear without removing helmet
- Pack of 50