My Account
Blasting
Showing 121–135 of 373 results
-
DMRMS2002- Exhaust Muffler for RMS
- Effective noise attenuation
- Flow-through design
- Female thread connection port
DMRMS2002- Exhaust Muffler for RMS
- Effective noise attenuation
- Flow-through design
- Female thread connection port
-
IPC1000Maximize efficiency with the RotorBlast Internal Pipe Blasting Tool (SKU: IPC1000). Designed for pipes from 8" to 36" ID, this twin-nozzle, spinning blast head ensures thorough sandblasting, offering optimal results.
- ADJUSTABLE CENTERING CARRIAGE SOLD SEPARATELY - IPC1200
- Twin nozzle, spinning internal pipe blasting system
- For sandblasting pipes 8" to 36" (200 mm - 900 mm) internal diameter
- Nozzles sold separately. Note the following:
- 2 nozzles are required for this unit.
- Use the BNAT nozzles for use in pipes from 8" to 11" ID.
- Use the BNASB nozzles for use in pipes from 12" to 36" ID.
- Note: ID blasting equipment requires significant maintenance - contact us for details.
IPC1000Maximize efficiency with the RotorBlast Internal Pipe Blasting Tool (SKU: IPC1000). Designed for pipes from 8" to 36" ID, this twin-nozzle, spinning blast head ensures thorough sandblasting, offering optimal results.
- ADJUSTABLE CENTERING CARRIAGE SOLD SEPARATELY - IPC1200
- Twin nozzle, spinning internal pipe blasting system
- For sandblasting pipes 8" to 36" (200 mm - 900 mm) internal diameter
- Nozzles sold separately. Note the following:
- 2 nozzles are required for this unit.
- Use the BNAT nozzles for use in pipes from 8" to 11" ID.
- Use the BNASB nozzles for use in pipes from 12" to 36" ID.
- Note: ID blasting equipment requires significant maintenance - contact us for details.
-
BAPSP24Pop-Up Umbrella Spider Plate for 24" large blast pot- Sits above pop-up valve. Allows valve to pop-up easily when a head of abrasive is stored above the blast machine
- Used in auto-loading applications such as blastrooms, recovery systems etc.
BAPSP24Pop-Up Umbrella Spider Plate for 24" large blast pot- Sits above pop-up valve. Allows valve to pop-up easily when a head of abrasive is stored above the blast machine
- Used in auto-loading applications such as blastrooms, recovery systems etc.
-
FMSL50TM- Coupling Sure lock
- BlastOne Surelock Coupling - 2" BSP(M)
FMSL50TM- Coupling Sure lock
- BlastOne Surelock Coupling - 2" BSP(M)
-
The Wheelabrator Titan wheel allows for a multitude of possibilities and variations to fit your shot blast machine The wheel housing is available in many sizes with a wide variety of wheel diameters, and blade lengths to define the perfect wheel for your specific application and production requirements for any wheel blast machine. The Titan wheel offer includes unique automatic control cage adjustment, indication of blade wear and a optional magna valve for precise control of the abrasive media flow with all wheel blasters. All existing shot blast machines, wheel blast machines & centrifugal wheel blasters cab benefit from the Wheelabrator latest generation blast wheel. -
BMS1604THTBULK BLASTER & MEGA BLASTER- Bulk Blast Pot capacity 160 cu ft / 4500 liters
- Manufactured by Schmidt to BlastOne unique specifications
- Garnet abrasive capacity - 23800 lbs / 10.8 tonne
- Ultimate Bulk Mega blast machine for large onsite blasting contractors
- Comes with 4 Thompson Valve metering valves
- Mounted on a highway certified trailer
BMS1604THTBULK BLASTER & MEGA BLASTER- Bulk Blast Pot capacity 160 cu ft / 4500 liters
- Manufactured by Schmidt to BlastOne unique specifications
- Garnet abrasive capacity - 23800 lbs / 10.8 tonne
- Ultimate Bulk Mega blast machine for large onsite blasting contractors
- Comes with 4 Thompson Valve metering valves
- Mounted on a highway certified trailer
Part Number Purchase Price BMS1604THT Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
- Diesel Compressor with steel Canopy
- Boxed unit with support mounts
- Spillage free frame & AS1210 vessel including aftercooler and water separator
-
- CPM, CPD, CPE, CPF & CPVS range of stationary electric compressors.
- Available in fixed or variable speed models.
- Silenced, single stage, oil injected screw element powered by a 400 Volt, 50 Hz 3 phase motor.
- Normal effective working pressures range between 4 to 13 bar (58 - 188 psi).
- Flow range between 27 - 1887 cfm (13 - 890 L/s).
-
BA840800079Older Schmidt bulk pots were built before the HALOK system became standard. That means they rely only on procedural discipline to prevent opening under pressure. The HALOK Retrofit Kit adds a mechanical failsafe that physically prevents the lid from being opened until the vessel is fully depressurized—bringing pre-2010 Schmidt pots up to modern safety standards.- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
BA840800079Older Schmidt bulk pots were built before the HALOK system became standard. That means they rely only on procedural discipline to prevent opening under pressure. The HALOK Retrofit Kit adds a mechanical failsafe that physically prevents the lid from being opened until the vessel is fully depressurized—bringing pre-2010 Schmidt pots up to modern safety standards.- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
Part Number Purchase Price BA840800079 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
Every BlastOne dehumidifier has the following features:- Unit-mounted filters, options include:
- 10% permanent washable 2" thick industrial
- 30% 2" (standard) pleated throw away
- 55% to 65% 4" cartridge throw away
- 99.97% HEPA 12" cartridge
- G-90 16-gage galvanized double-wall construction with insulation
- Direct-fired natural-gas, electric or propane reactivation systems
- Cooling coil and heating coil options
- Skid or trailer mounted
- Full protective enclosure
- Integrated control system with 10-point operational function display
- Shipping covers for all inlets and outlets
- Packaged refrigeration system options
- Packaged generator system options
- Unit-mounted filters, options include:
-
BMS1603TVH1600- Specified capacity 160 cu ft / 4500 liters
- Manufactured by Schmidt to BlastOne unique specifications
- Garnet abrasive capacity - 23800 lbs / 10.8 tonne
- 1600 cfm Airprep mounted directly on the front of the MegaBlaster Bulk Blaster
- Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
- Skid Mounted Bulk Blast Pot
BMS1603TVH1600- Specified capacity 160 cu ft / 4500 liters
- Manufactured by Schmidt to BlastOne unique specifications
- Garnet abrasive capacity - 23800 lbs / 10.8 tonne
- 1600 cfm Airprep mounted directly on the front of the MegaBlaster Bulk Blaster
- Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
- Skid Mounted Bulk Blast Pot
Part Number Purchase Price BMS1603TVH1600 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
- Diesel Compressor with Polyethylene Canopy
- Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel and LED road lights
- Spillage free frame & AS1210 vessel including aftercooler and water separator
- Normal effective working pressure range from 7-12 bar (100-175 psi) Flow 80-180 cfm (38-88 L/s)
-
- Diesel Compressor with steel canopy
- Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel (select models)
- LED road lights (select models)
- Spillage free frame & AS1210 vessel including aftercooler and water separator
-
- Inlet size 2" (50 mm) female thread
- Outlet sizes: 2" (50 mm) female thread - 1" (25 mm) female thread - plugged (top outlet)
- Rated for up to 800 cfm airflow volume at 150 PSI
- Connected in-line close to blast machine
- Expansion flow-chamber design with internal stainless steel coalescer
- Highly effective moisture droplet removal for peak productive blasting with minimal pressure loss
- Supplied with manual drain valve
- Includes axle, wheels and handle
- Air fittings not included - specify and order separately
-
- 3/4" NPSM (20mm) 'M' thread
- 1/2" (13mm) throat entry
- Straight bore
- Tungsten carbide liner
- Aluminum jacket and thread
- Use HF GFBS-P nozzle washers (1 included)